Under 1000
Under 1000
-
No sale
Optimizes powder drying applications, available in 500, 1000, or 2000 mL sizesfrom $302 USD -
No sale
High quality borosilicate glass from 100 to 3,000 mL for IKA rotary evaporatorsfrom $291 USD -
No sale
Economic ultra-portable standard or digital stirrer for up to 15L at 100 - 2000 rpmfrom $768 USD -
On sale
Convenient mini-stirrer for mixing quantities up to 250 ml at 300-1800 rpm$158 USD$135 USD -
No sale
Light-weight, ultra-mobile. Stir 250 mL at 300-1800 rpm with standard AA rechargable batteries$444 USD -
No sale
Attractively designed tube vortexer with touch function. Designed for mixing small samples.$406 USD -
No sale
Robust vortex shaker suitable for short (touch) or continuous operation.$823 USD -
No sale
For low speeds in cell/tissue culture applications. No shear effect on the bottom of the vessel$742 USD -
No sale
Strong turbulence at relatively low speeds. Reduced surface contact and outstanding centeringfrom $130 USD -
No sale
Stable quiet stirring even at high speeds. Creates deep turbulence for fast and efficient mixing.from $45 USD -
No sale
Symmetrical laminates allow use in tall vessels with small diameters. Ideal for cuvettes or test tubes.$40 USD -
No sale
Well-suited for use in round beakers, form ensures homogeneous mixing.from $48 USD -
No sale
Prevents absorption of solution or contamination. Suitable for highly abrasive and high-temp applicationsfrom $62 USD -
No sale
Highly magnetic (rare earth samarium-cobalt) allows for greater torque than conventional stir barsfrom $74 USD -
No sale
Cylindrical form without pivot ring ensures even mixing in flat bottom vessels, 10-80mm lengthsfrom $30 USD -
No sale
Pivot ring provides outstanding centering and consistent mixing for uneven or curved bottomfrom $37 USD -
No sale
Attractively designed test tube vortexer for mixing small samples. Touch-to-run operation.$272 USD -
No sale
For raising and supporting laboratory devices or vessels under 15 lbs from 70-300 mm$368 USD -
No sale
Foam insert for insertion into the Universal attachment MS 3.3.$44 USD -
No sale
Inserts into universal attachment for both MS 3 basic and MS 3 digital.from $46 USD -
No sale
Dispersing elements are the "tips" which attach to the Easy Clean T 25 to homogenize samples.$788 USD -
No sale
For RET control-visc. Glass-coated for aggressive media such as acid and alkaline solutions$412 USD -
No sale
Two separate steel sensors for heat transfer fluid and medium.$655 USD -
No sale
Made of stainless steel, for use with RCT basic safety control and RET basic.$322 USD -
No sale
Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.$322 USD -
No sale
Glass-coated temperature sensor for work with aggressive media such as acid and alkaline solutions.$436 USD -
No sale
Made of stainless steel, for use with RCT basic, RET basic and C-MAG HS digital series.$307 USD -
No sale
For use with RCT basic, RET basic and C-MAG HS digital series.$350 USD -
No sale
Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 80 mm$678 USD -
No sale
Radial flow, draws from top and bottom. High turbulence and shearing. Stirrer dia 42 mm$927 USD -
No sale
Draws material from above. Generates axial flow. Stirrer dia 30 mm. Minimum shearing$533 USD -
No sale
Draws material from above. Generates axial flow. Stirrer dia 50 mm. Minimum shearing$673 USD -
No sale
Draws material from above. Generates axial flow. Stirrer dia 70 mm. Minimum shearing$870 USD -
No sale
Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 45 mm$528 USD -
No sale
Tangential flow, high shearing. Ideal for medium to highly viscous fluids. Stirrer dia 90 mm$588 USD
